Innovation and Quality: CAMLogic awaits you at SPS Italia and SOLIDS Parma 2024. Get your free ticket!

CAMLogic level sensors

Level indicators are instruments for measuring any solid product such as powders, granular pieces and liquid compounds. In any container, silo, mixer, tank or hopper, the levels indicate the level status of the product inside the container. Based on the type of material and its density, the choice of the right level sensor is essential for the correct functioning of the storage system. For this reason all our measuring instruments, whether rotary, capacitive, conductive or float, can be customized according to the specific needs of the customer. Special versions of level indicators have been designed for ATEX environments and for plastering machines. The entire range of our level switches is of high quality and at affordable prices, choose the most suitable model, configure the product and request a quote or contact us to be guided in choosing the probe best suited to your needs.

Typology
Material Type
Functional area

No results found

Rotary paddle level switch made of durable die-cast aluminum with G 2” ½ threaded process connection or flange. A wide choice of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized with special lengths and electrical accessories.

Level sensor with rotary paddle made of sturdy die-cast aluminum with G 2” ½ process connection or with mounting flange. It is a short shaft variant. The wide choice of paddles allows the level sensor to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized with special lengths and electrical accessories.

Stainless steel level sensor with rotary paddle. The point level switch can be applied with G 2” 1/2 process connection or with mounting flange. Particularly suitable for the detection of food and corrosive materials. The wide selection of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Level sensor with rotary paddle made of aluminum and stainless steel. It can be applied with G 2” 1/2 process connection or with mounting flange. Designed for high temperature and explosion risk environments, also ideal for corrosive substances. The range of paddles allows the level sensor to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Level sensor with rotary paddle made of aluminum and stainless steel for all in product-contact parts. It can be applied with flange. It is a variant for condensate drainage and temperatures up to 600°C. The selection of paddles allows the level sensor to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Small-sized level sensor with rotary paddle, made of rugged die-cast aluminum. It can be applied with G 1” 1/2 (BSPP) process connection or flange. A wide choice of paddles allows the level sensor to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized with special lengths and electrical accessories.

Small-sized level sensor with rotary paddle, made of  aluminium and stainless steel. It can be applied with G 1” 1/2 (BSPP) process connection or flange (or tri-clamp). Particularly suitable for the detection of food and corrosive materials. The range of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Small-sized rotative level sensor, made of aluminum and stainless steel. It can be applied with G 1” 1/2 (BSPP) process connection or with flange. Designed for high temperature and explosion risk environments, also ideal for corrosive substances. The selection of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Small-sized level sensor with rotary paddle, made of sturdy die-cast aluminum. It can be applied with G 1” 1/2 (BSPP) process connection or flange. It is a specific variant for plaster. The instrument can be customized with special lengths and electrical accessories.

Level sensor with rotary paddle, explosion-proof, suitable in environments with gaseous, explosive or flammable mixtures. It is made of aluminum, and it can be applied with G 1” ½ process connection or flange. A wide choice of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Rotative level sensor made of aluminum and stainless steel. It can be applied with G 1" ½ process connection or with flange. Particularly suitable for the detection of food products and corrosive materials. The selection of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Level sensor with rotary paddle made of aluminum and stainless steel. It can be applied with flange. Variant for condensate drain, also designed for high temperature and explosion risk environments. A wide range of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

Capacitive level sensor based on the principle of sensing the electrical capacitance of a capacitor. It is made of aluminum and stainless steel. It can be applied with G 1” 1/2 process connection or with flange (tri-clamp). It is suitable for contact with food products. The capacitive level sensor can be customized.

Membrane level sensor made of sturdy die-cast aluminum. No power supply required. The instrument can be customized with LED indicator lamp and M12 circular connector.

Membrane level sensor made of sturdy die-cast aluminum. No power supply required. The instrument can be customized with rubber, FKM membranes or LED indicator lamp.

 

Pendulum level sensor made of sturdy die-cast aluminum. No power supply required. It is suitable for materials that settle forming a cone. The instrument can be customized based on your needs.

Conductive level sensor with G 1” 1/2 process connection. It allows independent control of two liquid level thresholds. The instrument can be customized with special lengths and electrical accessories.

Float level sensor made of sturdy die-cast aluminum and stainless steel. It can be applied with a mounting flange. No power supply required. The instrument can be customized with special lengths and accessories such as curved floats and rubber bellows.

Float level sensor made of rugged die-cast aluminium and stainless steel. It can be applied with a G 2” connection or flange. No power supply required. Resistant up to 100 degrees. The instrument can be customized with special lengths and accessories such as curved floats and silicon bellows.

 

Float level sensor built with permanent magnet and frictionless reed contacts. It has a G ⅜ connection. It does not require power supply. Ideal for use in contact with corrosive or food materials. The instrument can be customized with special lengths and accessories.

Float level sensor built with permanent magnet and frictionless reed contacts. It has a G ⅛ connection. It does not require power supply. It is ideal for use in contact with corrosive or food materials. The instrument can be customized with special lengths and accessories

 

Rotational speed monitor for any transmission shaft, made of rugged die-cast aluminum. It can be applied with direct four-hole connection, mounting flange or bracket. The instrument can be customized with a connection joint and the display for visual control.

Rotational speed monitor for any transmission shaft, made of rugged die-cast aluminum. It can be applied with direct four-hole connection, mounting flange or bracket. It is an inductive variant. The instrument can be customized with a connection joint and the display for visual control.

Signaling device that ensures control of the rotational speed of any transmission shaft. It can be applied with bracket connection. It is a variant for conveyor belts. The instrument can be customized with a connection joint and the display for visual control.

Connection: G 2” 1/2 (BSPP)
Discontinued rotary level indicator.

Connection: G 2” 1/2 (BSPP)
Discontinued rotary level indicator.

Connection: G 2” 1/2 (BSPP)
Discontinued rotary level indicator.

Connection: G 2” 1/2 (BSPP)
Discontinued rotary level indicator.

Connection: G 2” 1/2 (BSPP)
Discontinued rotary level indicator.

Rotary level indicator for plaster.
Connection:
G 2” 1/2 (BSPP)

Connection: G 1” 1/2 (BSPP)
Monitoring capacity on two levels.

CAMLogic Level Switches

 

CAMLogic level sensors allow you to reliably control the material present inside hoppers, tanks or silos. The wide range is designed to detect diverse materials even in extreme conditions.

CAMLogic manufactures rotary, capacitive, pendulum sensors and RPM monitors for solid materials, liquids, powders and granulates. Each plant, in fact, requires specific solutions and therefore high quality level switches, able to operate even in high temperature environments or in contact with corrosive materials. CAMLogic level sensors are resistant to atmospheric conditions and can be customized.

Browse the wide range of CAMLogic level indicators.

 

 

Any questions? Contact us